Tom Krips Construction Inc, Hull 276 & 277
Delivered December 2015 – Ft. Lauderdale, FL SECTIONAL “DECK BARGE”, 60’x23′-6″x5′, Rake on One End, Two 12″x40′ Spuds, Crane Tie Downs and Anti-Foul Paint.
Projected in Recent ProjectsUpper Missouri River Corporation, Hull 284
Delivered February 2016 – Brownville, NE “CLYDESDALE” Model Push Boat, 25′-3″x14′x5′. Twin John Deere 6068 Diesel Engines @300 HP each, ZF 305 Marine Gears, Four Flanking Rudders and Two Main Rudders, 600 Gallon Fuel Capacity, 21 Kw Diesel Water Cooled Generator, 9′ Push Knees, Twin 5 Ton Nabrico Deck Winches, USCG Approved B-V Fire Extinguisher Mounted on Fwd Deck, Zinc Anodes, Extra Search Light.
Projected in Recent Projects
Washburn Marine LLC, Hull 286
Delivered December 2015 – Morgan City, LA “CLYDESDALE” Model Work Boat, 25′-3″x14’x5′, Twin John Deere 6068 Diesel Engines @300 HP each, ZF 305 Gears, 500 Gallon Fuel Capacity, 8.5Kw Diesel Generator with Keel Cooling, Rudder Angle Indicators, Zinc Anodes and Air Conditioned Pilot House, to be Delivered without Topcoat Paint on Hull.
Projected in Recent ProjectsScott Bridge Company, Hull 282
Delivered November 2015 – Opelika, AL “CLYDESDALE” Model Push Boat, 25′-3″x14′x5′. Twin John Deere 6068 Diesel Engines @300 HP each, ZF 305 Gears, Four Flanking Rudders and Two Main Rudders, 500 Gallon Fuel Capacity, Racor Fuel Filters, 9′ Push Knees, Twin 5 Ton Nabrico Deck Winches, Perimeter Handrails and Fenders, Zinc Anodes, Anti-Foul Bottom Paint.
Custom Built Docks Inc, Hull 281
Delivered November 2015 – Ormond Beach, FL “DECK BARGE”, 35′ x 14′ x 3′, Aluminum Hatch 4’x4′ on Main Deck, Outboard Motor Bracket, Two 6″x20′ Spuds, Eight Cleats, Anti-Fouling Bottom Paint.
Thaler Construction Inc, Hull 279 & 280
Delivered October 2015- Islamorada, FL – SECTIONAL “DECK BARGE”, 55’x23′-6″x5′, Two Watertight Bulkheads per Section, Four 12″ Spud Wells, Twin Outboard Motor Brackets, Zinc Anodes and Anti-Foul Paint.
Orion Marine Group Inc, Hull 278
Delivered September 2015- Beaufort, NC “CLYDESDALE” Model Work Boat, 25′-3″x14’x6′, Twin John Deere 6068 Diesel Engines @ 300 HP each, ZF 305-3 Marine Gears, 500 Gallon Fuel Capacity, Two 5 Ton Deck Winches, Extended Push Knees to 9′ Overall, Elevated Pilothouse, Flanking Rudders, Galvanized Grating Over Steering Gear, Complete RAI System, Zinc Anodes.
Scott Bridge Company, Hull 273
Delivered September 2015- Orange Beach, AL “CLYDESDALE” Model Push Boat, 25′-3″x14′x5′. Twin John Deere 6068 Diesel Engines @300 HP each, ZF 305 Gears, Four Flanking Rudders and Two Main Rudders, 500 Gallon Fuel Capacity, Racor Fuel Filters, 9′ Push Knees, Twin 5 Ton Nabrico Deck Winches, Perimeter Handrails and Fenders, Zinc Anodes, Anti-Foul Bottom Paint.
Tom Krips Construction Inc, Hull 275
Delivered August 2015- Ft. Lauderdale, FL “STALLION” Model Work Boat, 25′-3″x12’x5′, Twin John Deere 4045 Diesel Engines @ 200 HP each, ZF 280 Gears, Stainless Steel Prop Shafts, 250 Gallon Fuel Capacity, 2 Ton Nabrico Winches, Zinc Anodes and Anti-Foul Paint.
Southern Dredging Co Inc, Hull 271
Delivered July 2015- Yonges Island, SC “STALLION” Model Dredge Tender, 25′-3″x12′x6′, Single John Deere 6068 Diesel Engine @300 HP, Twin Disc MG-5091 SC Transmission, 500 Gallon Fuel Capacity, Twin 5 Ton Nabrico Deck Winches, Flanking Rudders, Two Watertight Bulkheads, Stainless Steel Prop Shaft and Hydraulic lines.
